Quefrency Keyboard - Pre-Built

For Rev. 5 PCBs

• RP2040 microcontroller
• Underglow RGB LEDs

For Rev. 6 PCBs

• STM32G431 microcontroller
• Per-key RGB LEDs and Underglow RGB LEDs
• More layout options than Rev. 5

• FR4 Plates
• Cables to connect to computer (USB-A to USB-C) not included
• The USB-C to USB-C cable is used to connect both halves together
• Cherry MX PCB-mount clip-in stabilizers will be used
• Stabilizers will be clipped and lubed
• SKUF feet and FLAHNs installed

Keycaps

• Keycaps not included
• For keycap options, here's our list of recommended places to order from: Recommended Keycaps
• Also see our Keycap Selection Guide

Lighting

• Rev. 5 PCB - Underglow only
• Rev. 6 PCB - Per-key RGB LEDs and Underglow

Various layout options available

• Encoders on left and/or right half
• Split backspace
• Left half bottom row: More options available with Rev. 6
• Right half bottom row
• Right Shift: 1.75u-1u or 2.75u
• ISO Support: Rev. 6 only
• With or Without Left Macro section

This keyboard uses the popular open-source QMK Firmware with VIA enabled out of the box to allow you to remap all the keys just the way you want them.

Plug your keyboard in, open up the VIA app, and easily change what each key does to get the most out of your keyboard with your customizations! More info on what you can do here: VIA Usage Guide

• Kailh Box Jades (Clicky)
• Durock Shrimp 67g (Silent Tactile)
• Durock Dolphin 62g (Silent Linear)
• Milky Gateron Yellows (Linear)
• Customer Supplied - For this option, email us in advance so we can give you the mailing address to send switches to
• Self-Installed: For hotswap boards only. You will install your own switches, and you must remove the bottom plate to support the PCB while installing switches.

Unsure what to select? See this page about the various switch options we have: Keebio Switch Options

The default keymapping that the board is pre-programmed with can be found here: Default Keymaps