Iris Rev. 7 Keyboard - Hotswap PCBs for Split Ergonomic Keyboard
Iris Rev. 7 Keyboard - Hotswap PCBs for Split Ergonomic Keyboard
Iris Rev. 7 Keyboard - Hotswap PCBs for Split Ergonomic Keyboard
Iris Rev. 7 Keyboard - Hotswap PCBs for Split Ergonomic Keyboard
Iris Rev. 7 Keyboard - Hotswap PCBs for Split Ergonomic Keyboard
Iris Rev. 7 Keyboard - Hotswap PCBs for Split Ergonomic Keyboard
Iris Rev. 7 Keyboard - Hotswap PCBs for Split Ergonomic Keyboard
Iris Rev. 7 Keyboard - Hotswap PCBs for Split Ergonomic Keyboard
Iris Rev. 7 Keyboard - Hotswap PCBs for Split Ergonomic Keyboard
Iris Rev. 7 Keyboard - Hotswap PCBs for Split Ergonomic Keyboard
Iris Rev. 7 Keyboard - Hotswap PCBs for Split Ergonomic Keyboard
Iris Rev. 7 Keyboard - Hotswap PCBs for Split Ergonomic Keyboard

Iris Rev. 7 Keyboard - Hotswap PCBs for Split Ergonomic Keyboard

$69.99 Sale • Save
Color Pink

90-Day Return Policy

2-Year Warranty

The Iris keyboard, a split ergonomic keyboard with 4x6 vertically staggered keys and up to 4 thumb keys. Reprogrammable to any keymap layout you'd like with QMK/VIA!

Status: The Rev. 7 is currently out-of-stock and has been replaced with the Iris Rev. 8.

    Layout

    Each half of the board is a 4x6 matrix with the same vertical stagger as the Ergodox and with 2-4 thumb keys. Alternatively, a rotary encoder can be placed at the upper thumb key of each half.

    Many thanks to Lewis Ridden (/u/GAMING_FACE) for coming up with this design.

    • On-board ATmega32u4 controller
    • Switch support: MX-compatible only
    • USB-C port
    • MX Hotswap sockets pre-installed
    • 6 RGB underglow LEDs per half (12 total)
    • Per-key RGB LEDs
    • Option for rotary encoders at upper thumb key and outer top corners on each half
    • Pre-flashed with QMK Firmware and VIA configurator support
    • Left half PCB
    • Right half PCB

    Iris hotswap build guide

    This keyboard uses the popular open-source QMK Firmware with VIA enabled out of the box to allow you to remap all the keys just the way you want them.

    Plug your keyboard in, open up the VIA app, and easily change what each key does to get the most out of your keyboard with your customizations! More info on what you can do here: VIA Usage Guide

    The rotary encoder pins are not hotswapped, so encoders need to be soldered in if installing them.