Office/Warehouse Clearout Keyboard Finds

We've been cleaning up our office, and found we had accumulated a bunch of assembled keyboards that are no longer being sold. These are soldered boards being sold as-is. Each available keyboard has a corresponding number and description below. 

Sale of this batch of boards will begin Wednesday, September 3 at 12PM EST.

Full Keyboards:

All full keyboards come with a carrying case. No cables included.

• #1 - Iris LE, Rev. 4 PCBs (TRRS Jack), Box Jades, printed black top and frosted mid
• #2 - Iris PE, Rev. 5 PCBs, Gateron Yellows, clear acrylic plates, frosted mid, left-half encoder, right-half 2u thumb key
• #3 - Iris LE, Rev. 4 PCB (TRRS Jack), Cherry Blacks, blue in-switch LEDs, printed black top and frosted mid, rotary encoders in both thumb clusters
  
• #4 - Iris LE, Rev. 4 PCB (TRRS Jack), Box Midnight Jades (recolor), printed white top and frosted mid
  
• #5 - Iris LE, Rev. 4 PCB (TRRS Jack), Box Jades, printed black top and frosted mid, rotary encoders in both thumb clusters
  
• #6 - Iris PE, Rev. 5 PCB, Gateron Yellows, white acrylic plates
  
• #7 - Iris LE, Rev. 4 PCB (TRRS Jack), Box Pinks, printed black top and frosted mid, rotary encoders in both thumb clusters
  
• #8 - Iris PE, Rev. 5 PCB, Box Midnight Jades (recolor), stainless steel plates with a printed white top and printed frosted mid
  
• #9 - Iris LE, Rev. 4 PCB (TRRS Jack), Box Midnight Jades (recolor), printed black top and frosted mid, right-hand rotary encoder
  
• #10 - Iris LE, Rev. 4 PCB (TRRS Jack), Box Midnight Jades (recolor), printed white top and frosted mid, left-hand rotary encoder
  
• #11 - Iris PE, Rev. 5 PCB, Box Midnight Jades (recolor), clear acrylic plates, frosted mid, rotary encoders in both thumb clusters
  
• #12 - Iris LE, Rev. 4 PCB (TRRS Jack), Box Jades, printed black top and frosted mid
• #13 - Iris PE, Rev. 5 PCB, Gateron Yellows, white acrylic plates
• #14 - Quefrency, Rev. 3 PCB, Box Jades, with macro, left shift: 2.25u, left bottom: 4x1.25u/2.25u, bksp: 2u, ANSI enter, right shift: 1.75u/1u, right bottom: 2.75u/6x1u
• #15 - KBO-5000, Rev. 1 PCB, Box Jades, left-half encoder, left shift: 2.25u, left bottom: 1.25/1/2x1.25/2.25u, both right-half encoders, bksp: 2u, ANSI enter, right shift: 2.75u, right bottom: 1u/2.25/3x1.25
  
• #16 - KBO-5000, Rev. 1 PCB, Boba U4s, left shift: 2.25u, left bottom: 1.5/1/1.5/3u, bksp: 2u, ANSI enter, right shift: 1.75u, right bottom: 2.75u/1.25/1.25_1.25
  
• #17 - KBO-5000, Rev. 1 PCB, Box Jades, left shift: 2.25u, left bottom: 1.5_1.5/1.25/2.25u, bksp: 1u/1u (split), ANSI enter, right shift: 1.75u, right bottom: 2.25u/1.25/1.5_1.5
  
• #18 - Currently not working. KBO-5000, Rev. 1 PCB, Cherry Blacks, left-half encoder, stepped caps, left shift: 2.25u, left bottom: 1.5_1.5/1.25/2.25u, both right-half encoders, bksp: 2u, ANSI enter, right shift: 1.75u, right bottom: 2.25u/1.25/1.5_1.5
  
• #19 - KB0-5000, Rev. 1 PCB, Box Jades, left-half encoder, left shift: 2.25u, left bottom: 1.5_1.5/1.25/2.25u, both right-half encoders, bksp: 2u, ANSI enter, right shift: 1.75u, right bottom: 2.25u/1.25/1.5_1.5
  
• #20 - KBO-5000, Rev. 1 PCB, Gateron Yellows, left shift: 2.25u, left bottom: 1.5/1/1.5/3u, right right-half encoder, bksp: 2u, ANSI enter, right shift: 2.75u, right bottom: 3u/1.5/1/1.5

Single-half keyboards:

We also found some boards who have been abandoned by their other halves! Give these poor unpaired halves a home on your desk as general-purpose macropads or dedicated gaming pads. Or, if you already have a compatible board, add new switches or a new layout to the rotation and give one of your hands some variety. Do not come with a carrying case.

• #21 - Right-half Iris, Rev. 2 PCB (TRRS Jack), Choc V1 Burnt Oranges, blue in-switch LEDs, aluminum plates, 12.6mm from bottom of the SKUF foot to the top of the top plate. Firmware not VIA enabled. (this was quite the throwback to find!)
• #22 - Left-half Iris, Rev. 5 PCB, Choc V1 Browns, printed red tray (10.2mm from the bottom of the SKUF foot to the top of the top plate). Some keycap leg is stuck in the switch occupying the "C" key of the default layout (see picture). 
  
• #23 - Left-half Iris, Rev. 4 PCB (TRRS Jack), Boba U4s, printed white top and frosted mid
  
• #24 - Left-half Iris, Rev. 4 PCB (TRRS Jack), Cherry Blacks, rotary encoder, top row only has blue per-key LEDs, printed black top and frosted mid
  
• #25 - Left-half Iris, Rev. 4 PCB (TRRS Jack), Boba U4s, printed white top and frosted mid
  
• #26 - Right-half Quefrency, Rev. 3 PCB, Gateron Yellows, bksp: 2u, ANSI enter, shift: 1.75u/1u, bottom: 2.75u/6x1u
  
• #27 - Right-half Quefrency, Rev. 2 PCB (TRRS Jack), Box Midnight Jades (recolor), encoder, bksp: 2u, ANSI enter, shift: 1.75u/1u, bottom: 2.75u/2x1.25_3x1
  
• #28 - Right-half Quefrency, Rev. 3 PCB, Bobagums, encoder, bksp: 1u/1u (split), ANSI enter, shift: 1.75u/1u, bottom: 2.75u/6x1u
  
• #29 - Right-half Sinc, Rev. 2 PCB, Boba U4s, bksp: 2u, ANSI enter, shift: 1.75u/1u, bottom: 2.75u/6x1u
  
• #30 - Right-half KBO-5000, Rev. 1 PCB, Shrimps, bksp: 2u, ANSI enter, shift: 1.75u, bottom: 2.75u/2x1.25u_1.25u. The plate has been manually cut on the bottom row to fix the layout (see photo); this may be visible with keycaps on.