Quefrency Keyboard - Pre-Built

$79.99

No time for soldering? No problem, we've got pre-built Quefrency keyboards for sale now!

Notes

  • Tested and pre-flashed with default layout and VIA support
  • Ships within 3-5 business days usually
  • Your choice between Rev. 2, 3, 4, or 5 PCB
    • Rev. 2 uses TRRS for interconnect between halves
    • Rev. 3 uses USB-C for interconnect between halves
    • Rev. 4 uses USB-C for interconnect between halves and has Kailh Hotswap sockets pre-installed
    • Rev. 5 is the same as Rev. 4, but has additional bottom row layout options
  • FR4 Plates
    • Cables to connect to computer (USB-A to USB-C) not included
    • Keycaps not included
    • The USB-C to USB-C cable is used to connect both halves together
    • Cherry MX PCB-mount clip-in stabilizers will be used
      • Stabilizers will be clipped and lubed
    • No in-switch LEDs installed, just the pre-existing RGB underglow LEDs
    • Various layout options available:
      • Encoders on left and/or right half
      • Split backspace
      • ANSI/ISO
      • Left half bottom row
      • Right half bottom row
      • Right Shift: 1.75u-1u or 2.75u
      • With or Without Left Macro section
      • Full list of supported layouts
      • Note: Not all of the options shown in the image are available for Rev. 4 & 5, the possible options will change if a Rev. 4 or 5 PCB is selected

      Switch Options

      • Kailh Box Jades (Clicky)
      • Durock Shrimp 67g (Silent Tactile)
      • Durock Dolphin 62g (Silent Linear)
      • Milky Gateron Yellows (Linear)
      • Customer Supplied
        • For this option, email us in advance so we can give you the mailing address to send switches to
      • Self-Installed
        • For hotswap boards only
        • You will install your own switches, and you must remove the bottom plate to support the PCB while installing switches

      Unsure what to select? See this page about the various switch options we have: Keebio Switch Options

      Default Keymapping:

      The default keymapping that the board is pre-programmed with can be found here: Default Keymaps

      Need Help Selecting Options?

      Quefrency keyboard built with white switches and no keycaps.
      Fully built Quefrency keyboard with one rotary encoder in the outer corner of each half and black, white, and pink keycaps.
      Quefrency keyboard built with yellow and white switches, rotary encoders in the outer corners, and no keycaps.
      Layout options for the left half bottom row are 4x1.25u and 1x2.25u keys or 3x1.25u, 1x2.25u, and 1x1.25u keys. Layout options for the right half bottom row are 1x2.75u and 6x1u keys or 1x2.75u, 2x1,25u, a small empty space, and 3x1u keys.
      • Quefrency keyboard built with white switches and no keycaps.
      • Fully built Quefrency keyboard with one rotary encoder in the outer corner of each half and black, white, and pink keycaps.
      • Quefrency keyboard built with yellow and white switches, rotary encoders in the outer corners, and no keycaps.
      • Layout options for the left half bottom row are 4x1.25u and 1x2.25u keys or 3x1.25u, 1x2.25u, and 1x1.25u keys. Layout options for the right half bottom row are 1x2.75u and 6x1u keys or 1x2.75u, 2x1,25u, a small empty space, and 3x1u keys.